Sensor
| GS2.3 | |
|---|---|
| Array | 1928 × 1208. Image 1920 × 1200. |
| Pixel | 3.0 µm × 3.0 µm |
| Optical format | 1/2.6 inch |
| Active area | 5.78 mm × 3.62 mm |
| Shutter | Global. Linear. One exposure per frame. |
| Versions | Mono, RGB |
| Frame rate | 1920 × 1200 at 120 fps, digital supply 1.5 V. Also 60 fps and 30 fps. |
| Chief ray | 15° |
| Dynamic range | 68.6 dB |
| SNR max | 38.6 dB |
| Full well | 7300 e⁻ |
| Read noise | 2.6 e⁻ at 16× analog gain |
| QE, mono, 850 nm | 44.6% |
| QE, mono, 940 nm | 24.9% |
| Dark current | 60 e⁻/s at 60 °C |
| PRNU | 0.65% |
| DSNU | 17 e⁻/s at 60 °C |
| Analog gain | 1× to 8× |
| Digital gain | 1× to 8× |
| Output | RAW8, RAW10, YUV422 |
| Interface | MIPI, 1, 2 or 4 lanes, 8 or 10 bit. |
| On chip | Exposure control, black level, bad pixel correction, shading, sharpen, gamma, noise reduction, scaler, 2×2 binning, up to 4 windows, mirror, temperature sensor. |
| Temperature sensor | −40 °C to 85 °C, ±3 °C |
| Junction | −30 °C to 85 °C |
| Power | 331 mW at 120 fps. Standby 14 mW. |
| Supplies | AVDD 2.8 V. IOVDD 1.8 V. DVDD 1.2 V, or 1.5 V for 120 fps. |
| Package | CSP, 8.02 mm × 5.40 mm |
| Input clock | 24 MHz or 27 MHz typical |
Measured against SC233HGS
GS2.3 is Kaimou's sensor for these robot cameras. The same machines also use SC233HGS, AR0234, AR0235, Mira220, OG02C10 and IMX392. The table is our measurement against SC233HGS.
| GS2.3 | SC233HGS | |
|---|---|---|
| Pixel | 3.0 µm | 3.0 µm |
| Array | 1920 × 1200 | 1920 × 1200 |
| Optical format | 1/2.6 inch | 1/2.6 inch |
| Chief ray | 15° | 15° |
| Dynamic range | 68.6 dB | 65.7 dB |
| SNR max | 38.6 dB | 37.7 dB |
| Full well | 7300 e⁻ | 6050 e⁻ |
| Read noise, 16× | 2.6 e⁻ | 3.13 e⁻ |
| QE 850 nm | 44.6% | 19.9% |
| QE 940 nm | 24.9% | 9.38% |
| Dark current, 60 °C | 60 e⁻/s | 25.7 e⁻/s |
| PRNU | 0.65% | 0.63% |
| DSNU, 60 °C | 17 e⁻/s | 8.1 e⁻/s |
| SNR, 400 lux, 1× | 34.4 dB | 31.9 dB |
| SNR, 150 lux, 2× | 31.0 dB | 28.2 dB |
| SNR, 50 lux, 8× | 26.1 dB | 23.5 dB |
| SNR, 940 nm, 2× | 29.1 dB | 24.2 dB |
| SNR, 940 nm, 4× | 29.2 dB | 24.1 dB |
| Gray card, 20 lux, 25 °C | 21.7 dB | 17.5 dB |
| Gray card, 20 lux, 80 °C | 18.8 dB | 16.5 dB |
| Power, 25 °C, 1×, dark | 321 mW | 285 mW |
| Knee-point HDR | No | Yes |
| Scaler | Yes | No |
| Multi-window ROI | Up to 4 | No |
| Interface | MIPI | MIPI, LVDS, DVP |
Published figures
The GS2.3 column is our specification. The other columns are published figures. SC233HGS dynamic range here is the published linear figure, 62.65 dB, and the knee figure, 92.65 dB. The table above is the side-by-side measurement. AR0234 is end of life.
| GS2.3 | SC233HGS | AR0234 End of life | AR0235 | Mira220 | OG02C10 | IMX392 | |
|---|---|---|---|---|---|---|---|
| Status | Samples November 2026. Delivery March 2027. | Supply chain problems | End of life | Supply chain problems | Supply chain problems | Supply chain problems | |
| Optical format | 1/2.6 inch | 1/2.6 inch | 1/2.6 inch | 1/2.8 inch | 1/2.7 inch | 1/2.53 inch | 1/2.3 inch |
| Pixel | 3.0 µm | 3.0 µm | 3.0 µm | 2.8 µm | 2.79 µm | 3.45 µm | 3.45 µm |
| Array | 1920 × 1200 | 1920 × 1200 | 1920 × 1200 | 1920 × 1200 | 1600 × 1400 | 1632 × 1264 | 1920 × 1200 |
| Versions | Mono, RGB | Mono, RGB | Mono, RGB | Mono, RGB | Mono, RGB | Color | Mono, color |
| Chief ray | 15° | 15° | 0° or 28° | 0° or 28° | 0° to 30° | 8° | |
| Shutter | Global. One exposure. | Knee-point HDR | Global | Global | Pipelined global | DCG HDR | Global |
| Frame rate | 120 fps | 120 fps | 120 fps | 120 fps | 90 fps | 300 fps at 8-bit. DCG at 120 fps. | 167 fps at 10-bit |
| Dynamic range | 68.6 dB | 62.65 dB linear. 92.65 dB knee. | 71.4 dB | 65.3 dB | 63.7 dB | ||
| SNR max | 38.6 dB | 37.7 dB | 38 dB | 37 dB | 40 dB | ||
| Full well | 7300 e⁻ | 10800 e⁻ | 20000 e⁻ | ||||
| Read noise | 2.6 e⁻ at 16× | 7.0 e⁻ | |||||
| QE, 850 nm | 44.6%, mono | 55% | |||||
| QE, 940 nm | 24.9%, mono | 36% | |||||
| Dark current, 60 °C | 60 e⁻/s | 58 e⁻/s | |||||
| Shutter efficiency | 95 dB at 940 nm | 106 dB | |||||
| Interface | MIPI | MIPI, LVDS, DVP | MIPI, parallel | MIPI | MIPI | MIPI, LVDS | Sub-LVDS |
| Output | RAW8, RAW10, YUV422 | RAW8, RAW10 | 8-bit, 10-bit | 8-bit, 10-bit | 8-bit, 10-bit, 12-bit | 10-bit, 12-bit | 8-bit, 10-bit, 12-bit |
| Responsivity | Mono 9200 mV/lux·s. RGB 8004. | Mono 56 ke⁻/lux·s. Color 22.3. | Mono 41.9 ke⁻/lux·s. RGB 17.2. | ||||
| Power | 331 mW at 120 fps | Under 395 mW at 120 fps | 252 mW at 120 fps | 350 mW at 90 fps | |||
| Package | CSP, 8.02 × 5.40 mm | CSP, 6.96 × 4.96 mm | CSP, 10.0 × 5.6 mm | CSP, 7.66 × 5.65 mm | CSP, 5.4 × 5.4 mm | CSP | 226-pin LGA |
| Temperature | −30 °C to 85 °C | −30 °C to 85 °C | −40 °C to 85 °C | −20 °C to 85 °C | −30 °C to 85 °C |
Frame sync
| Master | The sensor drives the frame-sync pulse. |
| Slave | The sensor follows an external pulse. No pulse, no frame. |
| Exposure | In pulse-width mode, exposure equals the high time of the sync pulse. Minimum one line. |
| Several cameras | One master, the others on the same line. |
| Gain and exposure registers | Written on frame N, applied on frame N+2. GROUP_HOLD for a clean update. |
Next
GS2.3 is the sensor for these robots now. The next sensor stays on one exposure, so the frame rate stays up when the scene needs more dynamic range. Seed funding opportunity, $6 million, is for that step.
Order
- November 2026Samples.
- March 2027Delivery.
- ShopVolume pre-order, 9.50 USD per sensor. Samples, 45 USD.
The sample is made to work on a Raspberry Pi 5 and a Luckfox Aura, in partnership with Camemake.