# Kaimou Semiconductor > Kaimou GS2.3 is Kaimou Semiconductor's global-shutter image sensor for robotics, egocentric capture, data capture, and SLAM. GS2.3 is Kaimou's 2.3 MP global shutter, 1920 × 1200, 3.0 µm, 120 fps, one exposure per frame. Versions: mono or RGB. Dynamic range 68.6 dB. Full well 7300 e−. Read noise 2.6 e− at 16× analog gain. Chief ray 15°. Optical format 1/2.6 inch. Interface: MIPI. Samples November 2026. Delivery March 2027. Volume pre-order is 9.5 USD for mono and for RGB, in packages of 240 with a minimum order of 480. Samples are 45 USD per unit, shipping excluded. Shipping is a flat 35 USD per order for samples and for packages. Samples work on a Raspberry Pi 5 and a Luckfox Aura, in partnership with Camemake (https://www.camemake.eu/). Shop: https://www.kaimou-semiconductor.com/shop ## Pages - [Home](https://www.kaimou-semiconductor.com/) - [Home, Chinese](https://www.kaimou-semiconductor.com/zh-CN) - [Specification](https://www.kaimou-semiconductor.com/specification) - [GS2.3 vs SC233HGS, full measured comparison](https://www.kaimou-semiconductor.com/comparison) - [Comparison, markdown](https://www.kaimou-semiconductor.com/comparison.md) - [Measured comparison with SC233HGS](https://www.kaimou-semiconductor.com/specification#field) - [Shop](https://www.kaimou-semiconductor.com/shop) - [GS2.3 volume pre-order, 9.50 USD](https://www.kaimou-semiconductor.com/shop/gs23-volume-gs2-3-volume-pre-order-4526) - [GS2.3 sample, 45 USD](https://www.kaimou-semiconductor.com/shop/gs23-sample-gs2-3-sample-4527) - [Press kit](https://www.kaimou-semiconductor.com/press) - [Contact](https://www.kaimou-semiconductor.com/contactus) - [Full text for language models](https://www.kaimou-semiconductor.com/llms-full.txt) - [GS2.3 markdown](https://www.kaimou-semiconductor.com/gs2.3.md) - [GS2.3 data](https://www.kaimou-semiconductor.com/gs2.3.json) - [Catalog](https://www.kaimou-semiconductor.com/catalog.json) - [Short datasheet](https://www.kaimou-semiconductor.com/kaimou-semiconductor/gs2.3-short-datasheet.pdf) - Extended datasheet: on request at https://www.kaimou-semiconductor.com/contactus ## Measured against SC233HGS Same 3.0 µm, 1920 × 1200, 15° chief ray. - Dynamic range: 68.6 dB vs 65.7 dB - SNR max: 38.6 dB vs 37.7 dB - Full well: 7300 e− vs 6050 e− - Read noise at 16×: 2.6 e− vs 3.13 e− - QE at 850 nm: 44.6% vs 19.9% - QE at 940 nm: 24.9% vs 9.38% - Dark current at 60 °C: 60 e−/s vs 25.7 e−/s - Knee-point HDR: no vs yes - Scaler and up to 4 ROI windows: yes vs no - Colour checker SNR, brightness matched: 34.6 dB vs 31.9 dB at 400 lux, 31.0 vs 28.2 at 150 lux, 26.3 vs 23.7 at 50 lux. GS2.3 needs less digital gain for the same brightness. - SNR at 940 nm, 4×: 29.1 dB vs 24.0 dB. Matching brightness at 2× analog gain costs SC233HGS 3.95× digital gain against 2.04×. - Gray card SNR: 35.1 dB vs 32.0 dB at 850 lux, 80 °C. 18.8 dB vs 16.5 dB at 20 lux, 80 °C. - White points in the dark, 4×: 0 vs 7 at 60 °C. 8 vs 13 at 80 °C. - Power at 25 °C, 1×, dark: 320.7 mW vs 284.6 mW. SC233HGS uses less power. Full test-by-test data: https://www.kaimou-semiconductor.com/comparison and https://www.kaimou-semiconductor.com/comparison.md Interface: MIPI. Output: RAW8, RAW10, YUV422. ## Where it is used Robotics, egocentric capture, data capture, SLAM, and stereo. One exposure per frame. One frame-sync pulse across the cameras. - Robotics. Head, chest, and wrists on a humanoid. A forward camera on a mobile robot or a drone. A gripper camera, and the wrist camera that repeats the grasp. - Egocentric capture. A stereo pair on a headset, a cap, or a hard hat, about the spacing of two eyes. The head is moving. Global shutter keeps the doorway from shearing. - Data capture. Cameras on stands record a person at a bench. The take is usable when every camera saw the same moment, such as the cloth leaving the hand. - SLAM and stereo. The picture does not tear while the camera moves. A stereo pair or a camera ring follows one pulse, so each camera sees the same instant. - Near infrared. The mono version is for work at 850 nm and 940 nm. Mono QE is 44.6% at 850 nm and 24.9% at 940 nm. RGB keeps the colour of the lamp. ## Published figures for the other sensors in those cameras GS2.3 specification: 1/2.6 inch, 3.0 µm, 1920 × 1200, 68.6 dB, 38.6 dB SNR, 7300 e−, 120 fps, MIPI, one exposure. Mono or RGB. Samples November 2026. Delivery March 2027. - SC233HGS: supply chain problems. 1/2.6 inch, 3.0 µm, 1920 × 1200, 15°, 62.65 dB linear, 92.65 dB knee, 37.7 dB SNR, 120 fps, MIPI, LVDS, DVP. Mono or RGB. - AR0234: end of life. 1/2.6 inch, 3.0 µm, 1920 × 1200, 71.4 dB, 38 dB SNR, 120 fps, MIPI and parallel, CRA 0° or 28°. Mono or RGB. - AR0235: supply chain problems. 1/2.8 inch, 2.8 µm, 1920 × 1200, 65.3 dB, 37 dB SNR, 120 fps, 252 mW, MIPI, CRA 0° or 28°. Mono or RGB. - Mira220: 1/2.7 inch, 2.79 µm, 1600 × 1400, 63.7 dB, 40 dB SNR, 10800 e−, 7.0 e− read noise, QE 55% at 850 nm and 36% at 940 nm, 90 fps, 350 mW, MIPI. - OG02C10: supply chain problems. 1/2.53 inch, 3.45 µm, 1632 × 1264, color, CRA 8°, 300 fps at 8-bit, DCG HDR at 120 fps, 20000 e−, shutter efficiency 106 dB, MIPI and LVDS. - IMX392: supply chain problems. 1/2.3 inch, 3.45 µm, 1920 × 1200, 167 fps at 10-bit, Sub-LVDS, 226-pin LGA. Mono or color. ## Next GS2.3 is the sensor for these robots now: head, chest, wrists, headset or hard hat, gripper, forward camera, and the bench. The next sensor stays on one exposure, so the frame rate stays up when the scene needs more dynamic range. Seed funding opportunity, $6 million, is for that step. ## Contact Kaimou Semiconductor, 3rd Floor, Building E, Juxin Technology Industrial Park, Jianyu Road, Gushu, Xixiang, Bao'an District, Shenzhen, China. Phone: +86 198 5449 0636. No public email. Orders: https://www.kaimou-semiconductor.com/shop Seed round: https://www.kaimou-semiconductor.com/contactus Seed funding opportunity: $6 million. ## GS2.3 specification Maker: Kaimou Semiconductor. Product: GS2.3. Global shutter. One exposure per frame. Versions: mono or RGB. No other version is sold. - Array: 1928 × 1208. Image 1920 × 1200. - Pixel: 3.0 µm × 3.0 µm - Optical format: 1/2.6 inch - Active area: 5.78 mm × 3.62 mm - Chief ray: 15° - Frame rate: 1920 × 1200 at 120 fps with digital supply 1.5 V. Also 60 fps and 30 fps. - Dynamic range: 68.6 dB - SNR max: 38.6 dB - Full well: 7300 e− - Read noise: 2.6 e− at 16× analog gain - QE, mono, 850 nm: 44.6% - QE, mono, 940 nm: 24.9% - Dark current: 60 e−/s at 60 °C - PRNU: 0.65% - DSNU: 17 e−/s at 60 °C - Analog gain: 1× to 8× - Digital gain: 1× to 8× - Output: RAW8, RAW10, YUV422 - Interface: MIPI only, 1, 2 or 4 lanes, 8 or 10 bit - On chip: exposure control, black level, bad pixel correction, shading, sharpen, gamma, noise reduction, scaler, 2×2 binning, up to 4 windows, mirror, temperature sensor - Temperature sensor: −40 °C to 85 °C, ±3 °C - Junction: −30 °C to 85 °C - Power: 331 mW at 120 fps. Standby 14 mW. - Supplies: AVDD 2.8 V. IOVDD 1.8 V. DVDD 1.2 V, or 1.5 V for 120 fps. - Package: CSP, 8.02 mm × 5.40 mm - Input clock: 24 MHz or 27 MHz typical - Frame sync: master drives the pulse. Slave follows an external pulse. In pulse-width mode, exposure equals the high time of the sync pulse, minimum one line. One master, the other cameras on the same line. ## Price - Volume, mono: 9.50 USD per sensor - Volume, RGB: 9.50 USD per sensor - Sample, mono or RGB: 45 USD per sensor, shipping excluded - Shipping: 35 USD once per order, for a sample or for sensor packages - Package: 240 sensors. Minimum order 480. Selectable quantities: 480, 720, 960, 1200, 1440, 1920 - Samples: November 2026 - Delivery: March 2027 - Shop: https://www.kaimou-semiconductor.com/shop Sensitivity in lux is not published. GS2.3 has no knee-point HDR. ## GS2.3 vs SC233HGS, measured comparison > Kaimou Semiconductor measured GS2.3 and SC233HGS side by side on one bench, with the same light, the same lens and the same targets. Both parts are 2.3 megapixel global shutters with the same 1920 × 1200 image, the same 3.0 µm pixel, the same 1/2.6 inch optical format and the same 15° chief ray. Where SC233HGS measures better, the tables say so. Page: https://www.kaimou-semiconductor.com/comparison Chinese: https://www.kaimou-semiconductor.com/zh-CN/comparison ## On paper | | GS2.3 | SC233HGS | |---|---|---| | Image | 1920 × 1200 | 1920 × 1200 | | Pixel | 3.0 µm | 3.0 µm | | Optical format | 1/2.6 inch | 1/2.6 inch | | Chief ray | 15° | 15° | | Conversion gain, 10-bit | 0.169 DN/e− | 0.169 DN/e− | | Output | 10-bit | 10-bit | | SNR max | **38.6 dB** | 37.7 dB | SNR max is our bench measurement of both parts, not a datasheet figure. ## Colour checker, 400 to 50 lux A 24-patch colour checker at 400, 150 and 50 lux. Exposure 8 ms, offset 64, defective pixel correction on, 25 °C. Each sensor is measured at equal analog gain, then again with digital gain added until the 21 grey patches reach 400 DN. Same brightness (patches at 400 DN): | Light | GS2.3 SNR | SC233HGS SNR | GS2.3 digital gain | SC233HGS digital gain | |---|---|---|---|---| | 400 lux, 1× | **34.6 dB** | 31.9 dB | **1.01×** | 1.12× | | 150 lux, 2× | **31.0 dB** | 28.2 dB | **1.45×** | 1.60× | | 50 lux, 8× | **26.3 dB** | 23.7 dB | **1.06×** | 1.18× | GS2.3 reaches the same brightness with less digital gain, and digital gain amplifies noise along with the signal. Equal analog gain: | Light | Patch | GS2.3 | SC233HGS | |---|---|---|---| | 400 lux, 1× | #21 | 396 DN, 34.4 dB | 356 DN, 31.9 dB | | 400 lux, 1× | #22 | 213 DN, 31.7 dB | 188 DN, 29.6 dB | | 150 lux, 2× | #21 | 277 DN, 31.0 dB | 249 DN, 28.2 dB | | 150 lux, 2× | #22 | 150 DN, 28.7 dB | 131 DN, 25.4 dB | | 50 lux, 8× | #21 | 377 DN, 26.1 dB | 340 DN, 23.5 dB | | 50 lux, 8× | #22 | 206 DN, 23.5 dB | 180 DN, 20.3 dB | Brightness matched: | Light | GS2.3 digital gain | GS2.3 #21 | GS2.3 #22 | SC233HGS digital gain | SC233HGS #21 | SC233HGS #22 | |---|---|---|---|---|---|---| | 400 lux, 1× | 1.01× | 399 DN, 34.6 dB | 215 DN, 31.9 dB | 1.12× | 400 DN, 31.9 dB | 211 DN, 29.7 dB | | 150 lux, 2× | 1.45× | 399 DN, 31.0 dB | 217 DN, 28.5 dB | 1.60× | 397 DN, 28.2 dB | 210 DN, 25.4 dB | | 50 lux, 8× | 1.06× | 404 DN, 26.3 dB | 220 DN, 23.4 dB | 1.18× | 403 DN, 23.7 dB | 212 DN, 20.4 dB | ## Infrared at 940 nm Visible light blocked, infrared illumination on, 940 nm narrowband lens. Exposure 8 ms, offset 64, defective pixel correction on, 25 °C. Equal analog gain: | Gain | Patch | GS2.3 | SC233HGS | |---|---|---|---| | 2× | #21 | 184 DN, 29.1 dB | 101 DN, 24.2 dB | | 2× | #22 | 115 DN, 27.3 dB | 67 DN, 22.3 dB | | 4× | #21 | 357 DN, 29.2 dB | 204 DN, 24.1 dB | | 4× | #22 | 222 DN, 26.9 dB | 135 DN, 22.3 dB | Same brightness: | Analog gain | GS2.3 digital gain | GS2.3 #21 | GS2.3 #22 | SC233HGS digital gain | SC233HGS #21 | SC233HGS #22 | |---|---|---|---|---|---|---| | 2× | 2.04× | 399 DN, 29.1 dB | 250 DN, 27.3 dB | 3.95× | 401 DN, 24.2 dB | 264 DN, 22.4 dB | | 4× | 1.04× | 399 DN, 29.1 dB | 249 DN, 27.1 dB | 1.85× | 399 DN, 24.0 dB | 265 DN, 22.0 dB | At equal gain GS2.3 reads 184 DN where SC233HGS reads 101. Matching the brightness costs SC233HGS 3.95× of digital gain against 2.04×, and the extra gain raises the noise floor. ## Gray card, 25 to 80 °C A gray card in a real scene at 850 and 20 lux, at 25, 60 and 80 °C. Exposure 5 ms at 850 lux, 8 ms at 20 lux. Defective pixel correction on. Brightness matched with digital gain; the gain used is in the table. SNR: | Condition | GS2.3 SNR | SC233HGS SNR | GS2.3 digital gain | SC233HGS digital gain | |---|---|---|---|---| | 850 lux, 25 °C, 1× | **33.9 dB** | 30.7 dB | 1.00× | 1.20× | | 850 lux, 60 °C, 1× | **34.9 dB** | 32.0 dB | 1.00× | 1.00× | | 850 lux, 80 °C, 1× | **35.1 dB** | 32.0 dB | 1.00× | 1.00× | | 20 lux, 25 °C, 8× | **21.7 dB** | 17.5 dB | 1.00× | 1.22× | | 20 lux, 60 °C, 8× | **21.3 dB** | 17.7 dB | 2.00× | 2.28× | | 20 lux, 80 °C, 8× | **18.8 dB** | 16.5 dB | 2.00× | 2.25× | Fixed-pattern noise and shading, DN at 10-bit: | Condition | GS2.3 FPN | SC233HGS FPN | GS2.3 shading, pixel | SC233HGS shading, pixel | |---|---|---|---|---| | 850 lux, 25 °C, 1× | **16.61 DN** | 31.24 DN | **5.17 DN** | 7.78 DN | | 850 lux, 60 °C, 1× | **16.80 DN** | 21.59 DN | **5.63 DN** | 7.60 DN | | 850 lux, 80 °C, 1× | **14.74 DN** | 34.00 DN | **5.85 DN** | 8.77 DN | | 20 lux, 25 °C, 8× | 21.14 DN | **18.44 DN** | **10.53 DN** | 17.03 DN | | 20 lux, 60 °C, 8× | 46.93 DN | **44.73 DN** | **21.50 DN** | 32.47 DN | | 20 lux, 80 °C, 8× | **35.69 DN** | 60.98 DN | **24.66 DN** | 32.26 DN | Row and column shading terms stay under 1 DN on both sensors. SC233HGS shows less fixed-pattern noise at 20 lux, 25 and 60 °C. At 80 °C the order reverses: 35.69 DN against 60.98. ## White points in the dark Dark, analog gain 4×, defective pixel correction on. A white point is a pixel brighter than the frame average plus the threshold. | Condition | Threshold | GS2.3 white points | SC233HGS white points | |---|---|---|---| | 60 °C, dark, 4× | +60 DN | **0** | 7 | | 80 °C, dark, 4× | +150 DN | **8** | 13 | ## Power 25 °C, analog gain 1×, exposure 8 ms, dark, defective pixel correction on. | Rail | GS2.3 | SC233HGS | |---|---|---| | AVDD, 2.8 V | **20.7 mA** | 24.2 mA | | IOVDD, 1.8 V | 5.2 mA | **0.8 mA** | | DVDD, 1.5 V | 168.9 mA | **143.6 mA** | | Total power | 320.7 mW | **284.6 mW** | SC233HGS draws less power overall. That is the row it wins. ## Method All measurements are ours, run on our bench on engineering samples of both parts. Defective pixel correction was on in every test. Offset 64. Exposure 8 ms unless the table says otherwise. The colour tests use the same routine lens. The infrared test uses a 940 nm narrowband lens. Where brightness is matched, digital gain does the matching, and the gain is printed in the table. ## Measurement photos Each pair: GS2.3 left, SC233HGS right. - [Colour checker, 400 lux, 1×, equal gain](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-checker-400lux.jpg) - [Colour checker, 150 lux, 2×, equal gain](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-checker-150lux.jpg) - [Colour checker, 50 lux, 8×, equal gain](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-checker-50lux.jpg) - [Colour checker, 50 lux, 8×, brightness matched](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-checker-50lux-matched.jpg) - [940 nm, 2×, equal gain](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-940nm-2x.jpg) - [940 nm, 4×, equal gain](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-940nm-4x.jpg) - [940 nm, 4×, brightness matched](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-940nm-4x-matched.jpg) - [Gray card, 25 °C, 850 lux](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-gray-25c-850lux.jpg) - [Gray card, 25 °C, 20 lux](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-gray-25c-20lux.jpg) - [Gray card, 60 °C, 20 lux](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-gray-60c-20lux.jpg) - [Gray card, 80 °C, 20 lux](https://www.kaimou-semiconductor.com/kaimou-semiconductor/cmp-gray-80c-20lux.jpg) ## Contact Kaimou Semiconductor, 3rd Floor, Building E, Juxin Technology Industrial Park, Jianyu Road, Gushu, Xixiang, Bao'an District, Shenzhen, China. Phone: +86 198 5449 0636. Contact form: https://www.kaimou-semiconductor.com/contactus